Sandwich cargo trailers ISO 40 Type PK - model PK 3536-13-1750 / tandem

Standard equipment

Frame

Unique, torsion-resistant longitudinal beam chassis for safe motion characteristics

Hollow profile construction, welded and completely hot-dip galvanised

Support wheel

Reinforced, automatic support wheel, for the safe parking of the loaded trailer, load capacity 500 kg

Structure:

Thermal sandwich structure

Inner and outer shell made of hot-dip galvanised and powder-coated steel sheet, for heavy-duty use

Insulation 40 mm PU core

Exterior colour silver RAL 9006

Rear door double-leaf with aluminium hinges

Stainless-steel espagnolette lock, 20 mm, and stainless steel door stays

Loading platform

Made of multi-bonded phenol-coated board, 18 mm, anti-slip and waterproof

Electrical equipment

Lighting with 13-pin plug and reversing lights

Downloads

Kofferanhänger

Possibilities

Hochladerkofferanhänger Sonderlackierung in RAL

Hochladerkofferanhänger Seitentüre mit Drehstangenverschluss

Hochladerkofferanhänger mit Seitenklappe nach unten

Hochladerkofferanhänger mit Seitentüre und Auffahrklappe

Hochladerkofferanhänger mit Stirnwandspitz und schräge kombiniert

Hochladerkofferanhänger mit schränger Stirnwand

Hochladerkofferanhänger mit Verkaufsklappe und Werbeblende

Hochladerkofferanhänger mit seitlichen Türen und Seitenklappe kombiniert

Auftritt aus Riffelblech auf Zugdeichsel

	9 96 86 Access ramp, anodised aluminium, instead of rear wing doors, load capacity 500 kg, with gas-spring lifting aid and espagnolette lock, height 1900 mm, covered with aluminium chequer plate, with drive-on wedge, without gap (asymmetrical weight distribution of the load required!)	1
	9 96 87 Access ramp, anodised aluminium, instead of rear wing doors, load capacity 500 kg, with gas-spring lifting aid and espagnolette lock, height 2100 mm, covered with aluminium chequer plate, with drive-on wedge, without gap (asymmetrical weight distribution of the load required!)	1
	9 30 62 Sales flap with 2 gas springs, wind support and external espagnolette lock, Flap size up to max. 8 sqm or with flap height greater than 2100 mm up to max. 6 sqm, double-sided version only on request, (internal clearance reduced by 40 mm per flap)	1
	9 10 08 Door 1800x750 mm with aluminium edge and espagnolette lock	1
	9 22 94 Inside height 2100 mm	1
	9 10 04 Espagnolette lock on left rear door	1
	9 20 99 Scuff rail, galvanised, height 200 mm, per linear metre, only installed on side walls and headboard	1
	9 99 70 Rounded corners on structure for IH=1900 mm (complete roof crown and vertical corner edges 4-sided), interior height and total height + 115 mm passage width at rear frame - 400 mm to inside width, passage height at rear frame - 200 mm to inside height 3660x1750 mm	1
	9 41 31 Advertising screen, roof-mounted, 3660x1100 mm made of GRP/steel panels with aluminium edge and gas springs	1
	9 21 42 "UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed under the loading platform, (not waterproof)	1
	9 10 25 1 pair of stable supports, installed, reinforced version	1

	9 20 87 Slotted anchoring rail, galvanised, installed, per linear metre	1
	9 33 68 Aluminium rod lashing rail, rubber-coated, installed, per linear metre	1
	9 96 23 Rod lashing rail, galvanised, installed, per linear metre	1
	9 95 36 Folding lashing trough mounted recessed in the floor panel,	1
	9 95 37 Lashing ring, fold-down, screw-mounted	1
	52 10 20 Locking bar, application range from 1350 mm to 1850 mm	1

Frame

Support wheel

Structure:

Loading platform

Electrical equipment

Kofferanhänger

Choose your accessory

9 96 86

9 96 87

9 30 62

9 10 08

9 22 94

9 10 04

9 20 99

9 99 70

9 41 31

9 21 42

9 10 25

9 20 87

9 33 68

9 96 23

9 95 36

9 95 37

52 10 20

9 09 67

9 93 58

9 96 83

9 08 75

9 09 71

9 09 26

	9 96 83 Surcharge for central axle position with counterweight symmetrical weight distribution of the load possible due to axle offset (central) and counterweight	1
	9 08 75 Certificate for 100 km/h version, Axle shock absorber installed, for tandem (not possible with GTAS, GDP, VM)	1

	9 09 71 Refrigeration unit +6 °C Refrigerating capacity: - 1849 watts at a cold store temperature of +6 °C	1
	9 09 26 Refrigeration unit +6 °C Refrigerating capacity: - 2419 watts at a cold store temperature of +6 °C	1