Request quote
Standard equipment

Frame

Unique, torsion-resistant longitudinal beam chassis for safe motion characteristics

Hollow profile construction, welded and completely hot-dip galvanised

Support wheel

Reinforced, automatic support wheel, for the safe parking of the loaded trailer, load capacity 500 kg

Manoeuvring handle premium with lashing strap winder

Load securing equipment

6 folding lashing troughs, installed recessed in the floor frame profile Each can be loaded with up to 600 daN, Dekra-certified

Side panels:

Hollow aluminium profile, anodised, can be folded down on four sides removable, with recessed locks

4 slot-in corner stanchions for high load

Loading platform

made of multi-bonded phenol-coated board, 18 mm, partitioned with joint, anti-slip and waterproof

Electrical equipment

Lighting with 13-pin plug and reversing lights

Downloads
Possibilities
Zurröse in der Ladefläche abklappbar
Zurröse unter der Ladefläche
versenkter Verschluss
Ladefläche rutschhemmend wasserfest
Automatikstützrad
Beleuchtung mit 13 pol. Stecker
Bordwände abklappbar und Eckrungen steckbar
Hakenverschlüsse
Plane mit unterschiedlichen Ladehöhen
H-Gestell
Vorbereitung Auffahrschienen
abnehmbare Steckrungen
Palettentransport
Plane mit Auffahrklappe
Marktanhänger
Schiebeplane
Werkzeugkiste montiert
Aludeckel mit Fahrrädern
ausziehbarer Leuchtentraeger Pritschenhochlader
Hochplane mit Planenfenster für Seitlwinde
Einsteckrunge
Pritschenhochlader mit DIN-Zugöse
Videos
to overview

Choose your accessory

Structure:
Aluminium chequer plate floor mounted on phenol-coated board floor, pe
Aluminium chequer plate floor mounted on phenol-coated board floor, pe

9 05 97

Aluminium chequer plate floor mounted on phenol-coated board floor, pe
 1
Hakenverschluß anstelle versenkter Ausführung
Hakenverschluß anstelle versenkter Ausführung

9 05 76

Surcharge for angle lever locks (with spring protection) instead of recessed locks (not possible with side panel height 300 mm)
 1
Surcharge for aluminium side panels 400 mm instead of 350 mm high
Surcharge for aluminium side panels 400 mm instead of 350 mm high

9 97 26

Surcharge for aluminium side panels 400 mm instead of 350 mm high
 1

9 98 24

Surcharge for aluminium side panels 550 mm instead of 350 mm high
 1
Reduced price for vehicle without side panels and end stanchions
Reduced price for vehicle without side panels and end stanchions

9 97 44

Reduced price for vehicle without side panels and end stanchions
 1

9 97 84

Aluminium cover 2760x1500x100 mm with 1 gas-spring lifting aid, pre-installed, loose left-attached version
 1
Cross brace for aluminium cover for inside width 1500 mm
Cross brace for aluminium cover for inside width 1500 mm

51 92 24

Cross brace for aluminium cover for inside width 1500 mm
 1
"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed under the loading platform, (not waterproof)
"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed under the loading platform, (not waterproof)

9 21 42

"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed under the loading platform, (not waterproof)
 1
"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed on the side panel, (not waterproof)
"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed on the side panel, (not waterproof)

9 21 43

"UNSINN" toolbox, plastic, with lock internal dimensions LxWxH 430x180x188 mm, installed on the side panel, (not waterproof)
 1

9 10 21

1 pair of aluminium ramp rails 2560x300 mm, 2800 kg/pair incl. 1 pair of stable supports (only in combination with fixture for ramp rails incl. tensioning device)
 1
Fixture for ramp rails under the loading platform, incl. tensioning device
Fixture for ramp rails under the loading platform, incl. tensioning device

9 05 88

Fixture for ramp rails under the loading platform, incl. tensioning device
 1

9 10 25

1 pair of stable supports, installed, reinforced version
 1

51 88 40

Aluminium side panel attachment, 350 mm high, 4 sides with recessed locks
 1
Aluminium side panel attachment, 400 mm high, 4 sides with recessed locks
Aluminium side panel attachment, 400 mm high, 4 sides with recessed locks

9 97 43

Aluminium side panel attachment, 400 mm high, 4 sides with recessed locks
 1
Aluminium side panel attachment, 550 mm high, 4 sides with recessed locks
Aluminium side panel attachment, 550 mm high, 4 sides with recessed locks

9 98 20

Aluminium side panel attachment, 550 mm high, 4 sides with recessed locks
 1
Wire mesh screen attachment 650 mm high, swing-mounted on 4 sides
Wire mesh screen attachment 650 mm high, swing-mounted on 4 sides

51 74 33

Wire mesh screen attachment 650 mm high, swing-mounted on 4 sides
 1
Hinge set for side panel attachment for cover mounting on side panel attachment
Hinge set for side panel attachment for cover mounting on side panel attachment

51 92 40

Hinge set for side panel attachment for cover mounting on side panel attachment
 1
Load securing equipment
Additional folding lashing trough in the floor frame profile
Additional folding lashing trough in the floor frame profile

9 05 73

Additional folding lashing trough in the floor frame profile
H-frame, double-row IW=1500 mm, height=650 mm
H-frame, double-row IW=1500 mm, height=650 mm

51 57 12

H-frame, double-row IW=1500 mm, height=650 mm
 1
Tires/Wheels:
Spare wheel 195/50 R 13 C, mounted
Spare wheel 195/50 R 13 C, mounted

9 21 44

Spare wheel 195/50 R 13 C, mounted
 1
Spare wheel carrier installed on the headboard
Spare wheel carrier installed on the headboard

9 92 36

Spare wheel carrier installed on the headboard
 1
Chassis:
Certificate for 100 km/h version, axle shock absorber installed, single-axle (only for braked trailers) (not possible with GAS, VM)
Certificate for 100 km/h version, axle shock absorber installed, single-axle (only for braked trailers) (not possible with GAS, VM)

9 08 72

Certificate for 100 km/h version, axle shock absorber installed, single-axle (only for braked trailers) (not possible with GAS, VM)
 1
Certificate for 100 km/h version, Axle shock absorber installed, for tandem (not possible with GTAS, GDP, VM)
Certificate for 100 km/h version, Axle shock absorber installed, for tandem (not possible with GTAS, GDP, VM)

9 08 75

Certificate for 100 km/h version, Axle shock absorber installed, for tandem (not possible with GTAS, GDP, VM)
 1
Drawbar, height-adjust. Adjustment range 634 mm, up to 2600 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, AS, PU, C6 1325, C6 2630, ASK-, GTAS up to 3060 mm)
Drawbar, height-adjust. Adjustment range 634 mm, up to 2600 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, AS, PU, C6 1325, C6 2630, ASK-, GTAS up to 3060 mm)

9 06 54

Drawbar, height-adjust. Adjustment range 634 mm, up to 2600 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, AS, PU, C6 1325, C6 2630, ASK-, GTAS up to 3060 mm)
 1
Ball coupling for height-adjustable drawbar 2600 kg gross vehicle weight
Ball coupling for height-adjustable drawbar 2600 kg gross vehicle weight

9 06 57

Ball coupling for height-adjustable drawbar 2600 kg gross vehicle weight
 1
DIN-drawbar eye for height-adjustable drawbar until perm. total weight 2600 kg
DIN-drawbar eye for height-adjustable drawbar until perm. total weight 2600 kg

9 06 51

DIN-drawbar eye for height-adjustable drawbar until perm. total weight 2600 kg
 1
Drawbar, height-adjust. Adjustment range 634 mm, up to 3500 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, PU, C6 1325, C6 2630, GTAS up to 3060 mm, UBA 3.0 t)
Drawbar, height-adjust. Adjustment range 634 mm, up to 3500 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, PU, C6 1325, C6 2630, GTAS up to 3060 mm, UBA 3.0 t)

9 06 60

Drawbar, height-adjust. Adjustment range 634 mm, up to 3500 kg gross vehicle weight, without front section, hot-dip galvanised (TEA) (not possible with P, LM, ULK, LKK, K, AHK, PU, C6 1325, C6 2630, GTAS up to 3060 mm, UBA 3.0 t)
 1
Ball coupling for height-adjustable drawbar 3500 kg gross vehicle weight
Ball coupling for height-adjustable drawbar 3500 kg gross vehicle weight

9 06 63

Ball coupling for height-adjustable drawbar 3500 kg gross vehicle weight
 1
DIN drawbar eye for height-adjustable drawbar 3500 kg gross vehicle weight
DIN drawbar eye for height-adjustable drawbar 3500 kg gross vehicle weight

9 06 66

DIN drawbar eye for height-adjustable drawbar 3500 kg gross vehicle weight
 1
Tarpaulin body
Tarpaulin and frame, loading height 1600 mm, no assembly colour can be freely selected from Unsinn colour chart
Tarpaulin and frame, loading height 1600 mm, no assembly colour can be freely selected from Unsinn colour chart

9 97 23

Tarpaulin and frame, loading height 1600 mm, no assembly colour can be freely selected from Unsinn colour chart
 1
Frame and tarpaulin mounting up to inside length 4260 mm
Frame and tarpaulin mounting up to inside length 4260 mm

9 21 47

Frame and tarpaulin mounting up to inside length 4260 mm
 1

52 07 55

Flat tarpaulin 2760x1500 mm, colour grey with loose rubber cord and mounting material (with side panel attachment only with recessed lock)
 1

9 99 58

Net and tarpaulin bar, installed, per linear metre
 1
to overview